금형 배출 핀
(16)
텅스텐 스틸 곰팡이 에젝터 핀 부식 저항성 맞춤형 크기
가격: Negotiation
MOQ: Nagotiation
배달 시간: within 15 work days
상표: GEPE
하이 라이트:Tungsten Steel Mold Ejector Pin, Mold Ejector Pin Corrosion Resistant, Tungsten Steel Mould Ejector Pin
Non-Standard Customized High Hardness And Corrosion Resistance Steel Tungsten Materials Mold Ejector Pins Description Tungsten steel thimble is a thimble made of high-quality tungsten steel material by grinding and polishing with precision equipment. It is commonly called thimble, supporting needle,... 더보기
➤ 방문 웹사이트
고강도 SKD11 폼 에젝터 핀 비 표준 직선 에젝터 핀
가격: Negotiation
MOQ: 100pcs
배달 시간: within 7 work days
상표: GEPE
하이 라이트:SKD11 Mold Ejector Pin, Mold Ejector Pin Non Standard, Non Standard Straight Ejector Pin
High-Hardness SKD11 Materials Mold Straight Ejector Pin Description It is used to check the position, measure the size of holes, and check the distance between two holes. It can also be used as a stop gauge and measure the depth of holes. It is a necessary checking tool for standardized detection of... 더보기
➤ 방문 웹사이트
SKD11 정밀 발사 스핀 고강도 직선 발사 스핀
가격: Negotiation
MOQ: 100pcs
배달 시간: within 15 work days
상표: GEPE
하이 라이트:SKD11 Precision Ejector Pins, Precision Ejector Pins High Hardness, High Hardness Straight Ejector Pin
High-Hardness SKD11 Materials Precision Step Mold Ejector Pin Description After heat treatment, the hardness of SKD11 ejector pin can reach 58~60 degrees. It has the characteristics of high hardness, good toughness and not easy to wear. At the same time, it has a longer service life and is usually u... 더보기
➤ 방문 웹사이트
0.8mm-25mm Mold Ejector Pin Thimble HRC30-35 딱딱성 소화 처리
가격: Negotiation
MOQ: Negotiation
배달 시간: within 7 work days
상표: GEPE
하이 라이트:25mm Mold Ejector Pin, Mold Ejector Pin Thimble
The Diameter Of Thimble Is 0.8 Mm -25 Mm, And It Is A Plastic Mould Fitting Description Push rod refers to the part that pushes the product out of the mold. In order to eject the molded product tightly attached to the cavity, it is necessary to set the push rod with appropriate thickness in a balanc... 더보기
➤ 방문 웹사이트
내구성 S136 SUS304 곰팡이 발사기 핀 강성 경직 저항성 HRC30-35 스탬핑용
가격: Negotiation
MOQ: Negotiation
배달 시간: Negotiation
상표: GEPE
하이 라이트:Durable Mold Ejector Pin, Mold Ejector Pin Rust Resistant, SUS304 Mold Ejector Pin
Customizable and Durable Mold Ejector Pin for Stamping SS136/SUS304 Hardness HRC30-35 Product Description: Push rod refers to the part that pushes the product out of the mold. In order to eject the molded product tightly attached to the cavity, it is necessary to set the push rod with appropriate th... 더보기
➤ 방문 웹사이트
SKD61 완전 단단한 평면 에젝터 핀, 펀치 에젝터 핀
가격: Negotiation
MOQ: 1000pcs
배달 시간: within 7 work days
상표: GEPE
하이 라이트:SKD61 Flat Ejector Pin, Full Hard Flat Ejector Pin, Full Hard Punch Ejector Pins
SKD61 Mold Ejector Pin,Full Hard Flat Ejector Pins Ejector Punch Pins,Hardened Nitriding Mould Support Pin Description Push rod refers to the part that pushes the product out of the mold. In order to eject the molded product tightly attached to the cavity, it is necessary to set the push rod with ap... 더보기
➤ 방문 웹사이트
SKD61/H13 직선 평면 손가락 착용 저항 고 정밀 단계 핀
가격: Negotiation
MOQ: 100pcs
배달 시간: within 7 work days
상표: GEPE
하이 라이트:Straight Flat Thimble, Flat Thimble Wear Resistant, High Precision Stepped Pin
Thimble Factory Wholesale SKD61/H13 Straight Flat Thimble High-Precision Stepped Thimble Description Flat ejector pin is usually a plastic mould part, which is used to separate the product from the mould. The mould thimble made of SKD61/H13 can be used to pass through long and thin holes. It is requ... 더보기
➤ 방문 웹사이트
SKH-51 Mold Straight Ejector Pin Wear Resistant High Hardness HASCO 표준
가격: Negotiation
MOQ: 100pcs
배달 시간: within 7 work days
상표: GEPE
하이 라이트:Mold Straight Ejector Pin, Straight Ejector Pin Wear Resistant, Straight Ejector Pin High Hardness
High-Temperature-Resistant, Wear-Resistant And High-Hardness HASCO Standard SKH-51 Mold Straight Ejector Pin Description SKH-51 ejector pin is suitable for stamping dies, plastic dies, die-casting dies and forging dies, and is used for separating products from dies or forming stamping products. SKH-... 더보기
➤ 방문 웹사이트
SKH-51 고정도 단계 평면 에젝터 핀 착용 저항성 맞춤
가격: Negotiation
MOQ: 1pcs
배달 시간: within 7 work days
상표: GEPE
하이 라이트:Stepped Flat Ejector Pin, Flat Ejector Pin Wear Resistant, High Precision Stepped Ejector Pin
SKH-51 High-Precision Stepped Flat Ejector Pin With High Hardness, Wear Resistance And High Temperature Resistance. Description SKH-51 flat ejector pin is suitable for stamping dies, plastic molds, die-casting dies and forging dies, used for separation of products and molds or molding of stamping pr... 더보기
➤ 방문 웹사이트
정밀성 H13 / SKD61 에젝터 핀 허용성 맞춤형 에젝터 핀
가격: Negotiation
MOQ: Negotiation
배달 시간: within 15 work days
상표: GEPE
하이 라이트:RoHS SKD61 Ejector Pin, Precision SKD61 Ejector Pin, Tolerance Customized Ejector Pin
Wear-Resistant And High-Temperature Resistant SKD61/H13 Precision Step Mold Ejector Pin Description The ejector pin of stepped die is usually a plastic die part, which is used to separate the product from the die. The ejector pin made of SKD61/H13 can be used to pass through long holes and thin hole... 더보기
➤ 방문 웹사이트
GCr15 정밀 스텝 에젝터 핀 플라스틱 곰팡이에 대한 착용 저항
가격: Negotiation
MOQ: 100pcs
배달 시간: within 7 work days
상표: GEPE
하이 라이트:GCr15 Step Ejector Pin, Precision Step Ejector Pin, Step Ejector Pin Wear Resistant
Wear-Resistant And High Hardness GCr15 Precision Step Mold Ejector Pin Description The step mold ejector pin is usually a plastic mould part, which is used to separate the product from the mould. The mould thimble made of GCr15 can be used to pass through long and thin holes. The hardness is 50~55HR... 더보기
➤ 방문 웹사이트
GCr15 강철 곰팡이 발사 스핀 50HRC-55HRC 사용자 지정 발사 스핀
가격: Negotiation
MOQ: 1000pcs
배달 시간: within 15 work days
상표: GEPE
하이 라이트:Mold Ejector Pin 50HRC, GCr15 Steel Mold Ejector Pin, 55HRC Custom Ejector Pins
Mold Ejector Pin GCr15 Steel ,Hardness :HRC50-55,Pins 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Description Push rod refers to the part that pushes the product out of the mold. In order to eject the molded product tightly attached to the cavity, it is necessary to set the pus... 더보기
➤ 방문 웹사이트
GEPE GCr15 직선 평평 손가락 고 정밀 평평 핀 비 표준
가격: Negotiation
MOQ: 10pcs
배달 시간: within 7 work days
상표: GEPE
하이 라이트:GCr15 Flat Thimble, Straight Flat Thimble, High Precision Flat Pin
Thimble Factory Wholesale GCr15 Straight Flat Thimble High-Precision Stepped Thimble Description Flat thimble, also called flat pin, is mainly used to eject the rib part of plastic products, and there is a strip-shaped glue position. When the dome needle can't be put down, we choose to use flat thim... 더보기
➤ 방문 웹사이트
니트라이드 처리 곰팡이 에젝터 핀 SKD61 맞춤형 에젝터 핀
가격: Negotiation
MOQ: 100pcs
배달 시간: within 7work days
상표: GEPE
하이 라이트:Nitrided Treatment Mold Ejector Pin, Mold Ejector Pin SKD61, SKD61 Customized Ejector Pin
Non-standard Mold Ejector Pin SKD61, Pins 0.8 0.9 1.1 1.2 1.3 1.4 1.6 1.7 1.8 1.9 2.1 2.3 2.4 2.6 2.7 2.8 2.9*100-300 Description Mould thimble is an important part of mould, which is often used to control the opening and closing degree, positioning and clamping of mould. dimensional drawing Matchin... 더보기
➤ 방문 웹사이트
정밀 폼 에젝터 핀 이중 섹션 / 직선 에젝터 핀 고온 저항
가격: Negotiation
MOQ: Negotiation
배달 시간: within 3 work days
상표: GEPE
하이 라이트:Precision Mold Ejector Pin, Mold Ejector Pin Double Section, Straight Ejector Pin High Temperature Resistant
High Quality SKH-51 Precision Step Mold Ejector Pin,Hardness:60~65HRC,Wear Resistance And High-Temperature Resistance Description SKH51 precision step die ejector pin is widely used in die manufacturing, forming, cutting and other fields because of its excellent performance. For example, SKH51 eject... 더보기
➤ 방문 웹사이트
GCr15 SKD61 H13 Mold Ejector Pin 50HRC 비 표준 RoHS 인증
가격: Negotiation
MOQ: 100pcs
배달 시간: within 7 work days
상표: GEPE
하이 라이트:H13 Mold Ejector Pin, Mold Ejector Pin 50HRC, RoHS Mould Ejector Pin
Factory Wholesale Mold Ejector Pin Low Price And High Quality Product Description In plastic molds, it is also the most commonly used to separate the product from the mold; 2). Carbide ejector pins, such as tungsten steel ejector pins, can be used to pass through long and thin holes; 3). Ejector pin... 더보기
➤ 방문 웹사이트